Pages

Sunday, March 2, 2014

Manual Reset Procedure for Printers Canon i850 i950 S600 BJC 1000 BJC 2000 BJC 2100 and S450

Manual Reset Procedure for Printers Canon i850, i950, S600, BJC-1000, BJC-2000, BJC-2100 and S450

Canon i850, i950, S600
  1. Start with the printer OFF
  2. Hold down RESUME button and then hold down POWERbutton
  3. Release RESUME button
  4. Press RESUME twice, then release POWER
  5. Let green light blink until printer is done futzing
Select function with RESUME press POWER to execute :

Presses light color function Number of presses light color function.
  1. presses - green - Test print (or exit service mode on i960)
  2. press - orange - EEPROM info print (plus grid nozzle diagnostic on i960)
  3. presses - green - EEPROM initialize
  4. presses - orange - Reset waste ink counter
Canon S450 Printer
  1. Switch off Canon S450 printer
  2. Hold Resume button then press and hold POWER button, the beeper will sound once.
  3. Hold POWER and release RESUME
  4. Press RESUME twice
  5. Release Power button
  6. When the indicator lights steady, press RESUME three(3) times. The indicator should be orange.
  7. Press Power to set data

Canon BJC 1000 Series
  1. Remove Cartridge
  2. Unplug the AC Power Cord
  3. Hold down the RESUME button
  4. Release RESUME after plugging in the AC Power cord.
  5. Press the RESUME once within 5 seconds and release the RESUME.
  6. Press and HOLD RESUME for two seconds or more and release it.
  7. Press and HOLD RESUME for two seconds or more and release it.
  8. Unplug AC Power Cord to set data.
Canon BJC-2000 BJC-2100 Series
  1. Remove the Cartridge From Canon BJC-2000 BJC-2100 Printers
  2. Unplug the AC Power Cord
  3. Close Front access panel
  4. Hold down the RESUME/RESET button and plug in the power cable to AC power cord
  5. Release RESUME/RESET after plugging in the AC Power cord.
  6. Press the RESUME/RESET once within 5 seconds and release the RESUME/RESET.
  7. Press and HOLD RESUME/RESET for two seconds or more and release it.
  8. Press and HOLD RESUME/RESET for two seconds or more and release it.
  9. Unplug AC Power Cord to set data.

Related Posts by Categories

0 comments:

Post a Comment